The Philippine Electronics and Technology Forum
February 10, 2012, 11:43:53 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  

The Philippine Electronics and Technology Forum > Mixed Systems and Specialization > Philippine Amateur Radio > MOTOROLA GP-2000 VHF TRANSCIEVER
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: MOTOROLA GP-2000 VHF TRANSCIEVER  (Read 3215 times)
chanjun
CR2032 Battery
**

Pogi/Ganda Points: 0
Offline Offline

Gender: Male
Posts: 23
« on: July 11, 2009, 07:07:32 PM »
I recently purchased Motorola GP-2000 VHF transceiver ang problema nakalimutan ko na kung paano mag set ng frequency(transmit/receive) or baguhin yung factory set frequency. wala kasi sa manual maliban dun sa initial settings (by turning on the volume/switch-on knob habang naka press & hold yung monitor button).
paki share mga buddies kung pano e access yung mga ibang parameters.
Logged
it's not the years, but by mileage.
The Philippine Electronics and Technology Forum
« on: July 11, 2009, 07:07:32 PM »
 Logged
bruceli
CR2032 Battery
**

Pogi/Ganda Points: 0
Offline Offline

Gender: Male
Posts: 25


"RAM 10"
« Reply #1 on: July 11, 2009, 07:29:40 PM »
mabusisi yan sir.. taga san ba kau.?  para personal sana ituro sta ana manila lang ako..
Logged
VOLUNTEERS ARE NOT PAYED, NOT BECAUSE WE ARE WORTHLESS BUT BECAUSE WE ARE PRICELESS

Soon.. i will be an ENGINEER.. no matter how long it takes...^_^
chanjun
CR2032 Battery
**

Pogi/Ganda Points: 0
Offline Offline

Gender: Male
Posts: 23
« Reply #2 on: July 11, 2009, 07:44:46 PM »
Quote from: bruceli on July 11, 2009, 07:29:40 PM
mabusisi yan sir.. taga san ba kau.?  para personal sana ituro sta ana manila lang ako..

malayo sir, dito ako sa pangasinan.
Logged
it's not the years, but by mileage.
bruceli
CR2032 Battery
**

Pogi/Ganda Points: 0
Offline Offline

Gender: Male
Posts: 25


"RAM 10"
« Reply #3 on: July 12, 2009, 06:20:02 PM »
anu ba problema.?
Logged
VOLUNTEERS ARE NOT PAYED, NOT BECAUSE WE ARE WORTHLESS BUT BECAUSE WE ARE PRICELESS

Soon.. i will be an ENGINEER.. no matter how long it takes...^_^
marvinmx250
CR2032 Battery
**

Pogi/Ganda Points: 0
Offline Offline

Posts: 20
« Reply #4 on: October 09, 2009, 12:50:34 AM »
wala bang supplied user manual Gp2000?
Logged
marvinmx250
CR2032 Battery
**

Pogi/Ganda Points: 0
Offline Offline

Posts: 20
« Reply #5 on: October 09, 2009, 12:51:41 AM »
planning to buy one kc.
Logged
pinoycobra
CR2032 Battery
**

Pogi/Ganda Points: 0
Offline Offline

Posts: 36
« Reply #6 on: November 19, 2009, 09:26:14 PM »
ano na balita dito? naka kuha ba kayo ng user manual na kumpleto?
paki share naman po please? thank you
Logged
Dictador
CR2032 Battery
**

Pogi/Ganda Points: 1
Offline Offline

Gender: Male
Posts: 21
« Reply #7 on: February 14, 2010, 09:45:43 PM »
press "moni or ptt on"then  lalabas RW then pres + or - then lalabas na ang mga freq nya kada channel...
Logged
xirtam
CR2032 Battery
**

Pogi/Ganda Points: 0
Offline Offline

Posts: 17
« Reply #8 on: March 13, 2010, 01:11:14 PM »
 In my experience, may programming lock po ang motorola gp2000 VHF,diba kapag i aaccess natin yung programing mode, we need to push moni + power on knob, tapos lalabas sa screen is "RW", dapat kapag nag press ka sa Down arrow (-) or Up arrow (+), lalabas sa screen ang ch 001 or 099(max)?. kapag hindi yan lumabas, it means it is "protected", heres the steps to unlock it:

1st - Turn-off the radio.

2nd- press and hold PTT together with MONI and Up arrow (+), then turn on the radio.
        Note: After you turn on the radio, eto dapat lalabas sa screen "PROTECT OFF" (di ko po sure yung exact word basta may "OFF" yun). Undecided

3rd - Immediately press PTT after you see the "PROTECT OFF", dahil almost 1 second lang, automatic na babalik sa normal mode yung screen.

4th - Kapag na press nyo naman agad before it return to normal mode. lalabas parin yung normal mode after u press the  PTT immediately.

5th - Para malaman mo kung na unlock mo yung programming mode, simply turn the radio off again then press MONI + turn on, lalabas sa screen is "RW", then press plus (+) or minus (-),..if the CH 001, or CH 099 etc. is appear on the screen? successful po yung steps na gingawa nyo. then dun nyo na ma proprogram sa desired frequency na gusto nyo,.

Note: I suggest na after nyong mag program ng channels please return it to programming lock mode to protect your programed frequency channel. To lock it just the same step 1 to 2. ang lalabas is "PROTECT" then press PTT immediately again, and bingo its lock..

If my tanong pa po kayo regarding motorola gp200 VHF, post nyo lang po, or PM me..

Thanks!

73's  Grin
Logged
jojo23
LR44 Battery
*

Pogi/Ganda Points: 0
Offline Offline

Posts: 2
« Reply #9 on: June 25, 2010, 10:33:31 AM »
good day sa lahat,i bought one unit of motorola gp2000 as my first radio sa goodhand,gusto ko sana maging hobby ang pag radio .honestly,wala ako kaalam alam even sa basics nd  pag raradyo.help naman and sana kung pwede pasali sa group/s ,same problem here with chanjun,ni hindi ko alam kalikutin radyo,dyahi man pero pa2ro naman po..here's my contact nos.0927-8780-350 loc.o along mindanao ave.near quirino h-iway q.c.tnx in advance..
Logged
insect111
LR44 Battery
*

Pogi/Ganda Points: 0
Offline Offline

Posts: 1
« Reply #10 on: August 09, 2010, 09:54:24 AM »
Quote from: xirtam on March 13, 2010, 01:11:14 PM
In my experience, may programming lock po ang motorola gp2000 VHF,diba kapag i aaccess natin yung programing mode, we need to push moni + power on knob, tapos lalabas sa screen is "RW", dapat kapag nag press ka sa Down arrow (-) or Up arrow (+), lalabas sa screen ang ch 001 or 099(max)?. kapag hindi yan lumabas, it means it is "protected", heres the steps to unlock it:


the best reply so far! this works.
Logged
tikoy
CR2032 Battery
**

Pogi/Ganda Points: 0
Offline Offline

Posts: 18
« Reply #11 on: September 15, 2010, 09:50:53 AM »
Quote from: chanjun on July 11, 2009, 07:07:32 PM
I recently purchased Motorola GP-2000 VHF transceiver ang problema nakalimutan ko na kung paano mag set ng frequency(transmit/receive) or baguhin yung factory set frequency. wala kasi sa manual maliban dun sa initial settings (by turning on the volume/switch-on knob habang naka press & hold yung monitor button).
paki share mga buddies kung pano e access yung mga ibang parameters.



GP2000

try this link sis nandito ang sagot naka pdf na manual. good luck
Logged
chotzzzz17
LR44 Battery
*

Pogi/Ganda Points: 0
Offline Offline

Posts: 3
« Reply #12 on: September 29, 2010, 04:59:48 PM »
Mga sir, paano po ba palitan ang alphanumeric display sa GP2000? patext na lang po ako sa technique on how maraming salamat po.. 09158084617
Logged
The Philippine Electronics and Technology Forum
   
 Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  


Related Topics
Subject Started by Replies Views Last post
cdj-2000 (china made)
Audio and Video Players 		eijnuj 16 1746 Last post June 19, 2009, 03:01:37 AM
by danny
Buying PSP3000/2000 slim
Items For Sale 		snider 1 337 Last post July 13, 2009, 10:44:46 PM
by RaffT
promac cinema 2000
Consumer Electronics, Appliances and Electronic Gadgets 		sir_aniko 7 704 Last post August 08, 2010, 02:02:29 PM
by pENdot
L/F Motorolla Base Transciever and Antenna
Philippine Amateur Radio 		rma 0 250 Last post July 03, 2010, 09:37:31 AM
by rma
cinemac 2000,promac « 1 2 »
Consumer Electronics, Appliances and Electronic Gadgets 		junior090983 30 1005 Last post August 16, 2011, 10:08:59 PM
by malavegs
alexan AC-2000 multimeter (missing parts) « 1 2 »
Instrumentation, Test Equipment and Materials 		sharbor_tech 23 450 Last post June 10, 2011, 07:13:34 PM
by sharbor_tech
Guys, Help poh..paanu ba gumawa ng 3-channel push-to-talk FM Transciever?
General Wireless Communication 		hiroyuki_tomita 1 117 Last post July 14, 2011, 02:16:20 AM
by bravokilo
Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!