Is this a polarized smd capacitor?

[alyas]

This is a SMD 1uF 35V capacitor.  The dimensions are approximately 0.14x0.11 inches which does not seem to be standard and I can't find it in the eagle library.  Is this a polarized capacitor or not?  There is a single band which would suggest its polarized but which is the positive and which is the negative terminal?

['yus]

parang tantalum type sya.. and ang tantalum capacitors are polarized..
yung terminal na malapit sa white stripe is the negative terminal..

['yus]

yung terminal na malapit sa white stripe is the negative terminal..

mali pala, yung polarity bond indicates the positive terminal..

[alyas]

Yup correct ka bro.  Points for you.  I remeasured again the smd cap in milimeters and it was 3.5x2.8 mm and was able to find the component in the eagle library.  Its a euro standard dimension and the component layout in eagle shows that the band indicates the positive terminal.

['yus]

nakagamit na ako nyan dati, pero ang nakalagay is "10 35", meaning 10uF/35V..
ginamit ko para makasukat ng ripple ng output voltage ng isang SMPS..

sa'min, for testing purposes na lang ang ganyang type ng capacitors, di na ginagamit sa mga designs..
i think may issue sya regarding either sa ROHS-compliance or sa durability (lalo na kung pangmatagalan yung design). and for safety purposes na rin siguro..

@alyas, thanks din nga pala..