f1 pls

[soʇuǝɔ]

pano po aggregate ang switches   

[Mystique]

Sa networking pala to  hehehehe,   you simply connect switch interfaces together ..... what type of aggregation are you talking about?  Depende kasi yan sa functionality and capabilities ng switch.

[soʇuǝɔ]

3com 4400
gusto mangyari dalawa ang ilagay kung backbone para mas mabilis ang transfer ng data... kasi sa 100mbps lang parang my delayed

unknown protocol kc minsan 

[Mystique]

Kung managed switch yang 3com 4400, most likely it will have separate uplink ports and support link aggregation.

If you are only using 10/100 interface as the uplink to the aggregation ( or core switch), you can bind two 10/100 interfaces together and do a port or link aggregation so the total uplink bandwidth is 200 MBPS.   So you will physically connect two 10/100 interface ports from your access switch to two interface of the aggregate/core switch.