Increase Hard Disk Speed in Windows XP

[lightelectro]

To speed up your hard disk speed we need to configure a special buffer in the computer's memory in order to enable it to better deal with interrupts made from the disk.

This tip is only recommended if you have 256MB RAM or higher.

Follow these steps:

1. Run SYSEDIT.EXE from the Run command.

2. Expand the system.ini file window.

3. Scroll down almost to the end of the file till you find a line called [386enh].

4. Press Enter to make one blank line, and in that line type

Irq14=4096


Note: This line IS CASE SENSITIVE!!!

5. Click on the File menu, then choose Save.

6. Close SYSEDIT and reboot your computer.

Done. Speed improvement will be noticed after the computer reboots.

The most speed improvement is visible with IDE drives, however there are reports that this tweak also does good for SCSI disks. In any case, it won't harm your system, so why not try it yourself.

[Woots29]

wow hmm chechek ko yan sa pc ko sa work

salamat carl

[lightelectro]

Your welcome Warren.

[Woots29]

+1

[lightelectro]

Thanks.

[centOS]

wow additional info hehehe thanks notepad na to agad 

+1 pogipoints ka sir...


thanks

[freqz]

I think if you increase the speed of your hdd in default setting it can cause of serious problems like crashing or bad sector cause of overheating.

Be sure you have proper temperature conditioning before you do.

[cass]

hindi kaya ma pre pressure ung hdd?tested na ba to?

[brian_po]

waiting for replies with good feedback 

[existing_evil]

Paano pa ma notice na nagspeed-up nga yung hdd ??hehe..

[insomartin]

http://www.sisoftware.net/

[shadowstriker07]

eto ung site na pinagkunan ni kuya ^___^

http://www.petri.co.il/increase_hard_disk_speed_in_windows_xp_2003.htm


Warning:.... speeding up ung HDD makes the HDD consumes more power (electricity) otherwise parang inooverride nia ung drive...  and then alam nmn ntin cguro ang nangyayari kpg inooverride natin ang isang drive.... parang overclocking...

[9 Volts]

mga Masters..Maam/Sir..

5 years na po sken yung pc ko & na upgrade ko na rin yung RAM..
May problema naman po ako sa Hard Drive kc maliit.. IDE HD.. Maxtor.. 89 GB lang po xa..
Gusto ko mag install ng bagong hard drive.. gagawin ko slave yung luma.. pa help po eto questions:

1. May nabibili po SATA HD.. compatible po sa yung sa PC ko na IDE HD yung gamit na HD.. may wire connection compatibility po ba yun sa Motherboard ko..
    iba po kc yung wire eh
2. Napaka bagal po ng data transfer ng computer ko. kahit 1.24 GB na po.. sa Maliit na Hard Disk po ba yun.. d ko pa po na check yung RPM nya.. pero 89GB  yung estimated capacity nya..

3. MAXTOR (IDE) po yung gamit ko na HD.. kung bibili po ako ng MAXTOR SATA or other kind of hard disk na available po ngaun.. pwede po ba yun or may   compatibility po?

4. naiinis na kc ko sa kaka transfer transfer ng mga files sa USB at ibang computer pag nacocorrupt yung PC ko eh.. dahil maliit yung memory.. kahit mag 2 partition ka di kakayanin  nung isang drive yung laman nung isa.. bad3p.. huhuhu

5. If ever naka buy na po ako ng hard drive nailagay ko na.. direcho format ko na po ba ng windows xp cd to format?

pa help po mga masters..

Thanks po!♥